Best Quality 2024A/2019C CAT Caterpillar ET 3 Diagnostic Adapter III CAT Truck Diagnostic Tool PLUS DELL 5414 Laptop
We will install the software before ship, so you can get it work directly after you receive it.
Caterpillar electronic technician 2024A (replaces CAT ET 2023A, 2022C,
2022B, 2022A, 2021A, 2019C) with WinFlash future is an updated version
of the caterpillar dealer diagnostic software that can help technicians
to diagnose existing and potential problems with their electronically
controlled Caterpillar Engines and Machines.
2024A Caterpillar
Electronic Technician software With CAT ET 3 Cat caterpillar adapter 3
support caterpillar diagnostic till 2024.
Cat ET Caterpillar Electronic Technician Software:
Brand: Caterpillar
Region: WorldWide
Support Multi-languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Support All cars of CAT
The list of supported CAT machines and engines can be found below:
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas
Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground - Hard Rock
Underground - Longwall
Underground - Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers
Product Description
CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the
capability to access Electronic Control Modules (ECMs) from a personal
computer. Many job-critical tasks can be performed with an electronic
service tool. The user can display the status of a group of parameters
(temperatures, pressures, etc.) simultaneously, view active and clear
logged diagnostics, display the current configuration of an ECM and much
more. The service tool works with a communication adapter to allow
connection to an ECM. A graphical interface makes this software quick to
learn and easy to use. A separate pull-down menu for each function
enhances the "ease of use." The version and identification of the ECM is
automatically retrieved and is displayed on a summary screen when the
program is started. Diagnostic tests and calibrations can also be
performed.
CAT Caterpillar ET Diagnostic Tool enable service
technicians to reprogram ECMs, reconfigure control system parameters,
fine tune performance or diagnose the root cause of a failure the first
time. These powerful tools allow service personnel to display and
analyze vital performance and health information from any system quickly
and accurately. The service tool communicates with any system using ATA
(J1708), J1939 or the Caterpillar proprietary data link networks. The
service tools provide information and features needed to help a
technician diagnose problems and perform repairs and to customize and
personalize the operation of a product. By allowing customers to design
flexibility and configurability into a product, Caterpillar service
tools stretch beyond the capabilities of preprogrammed ECMs or onboard
display systems.
CAT Caterpillar ET Diagnostic Tool Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where
irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
- 2D and 3D Histogram plotting capability (engine software
support required).
- Custom Status screen groups
- Snapshots (Download and display snapshot data recorded by the
ECM)
- Configuration Aid that allows upload/download of same
configuration to multiple control modules
Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool's primary functions without connecting to ECM(s)
Perform customized diagnostic tests to identify harness problems,
cylinder or component failures (Automatic Cylinder Cutout with cylinder
to cylinder fueling comparison)
Caterpillar ET Software Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Package:
1. Used DELL 5414 Laptop
2. Real CAT et3 Comm Adapter III(it's best quality cat et 3,not adapter 2,please check Communication port)
3. USB Cable (From device to your computer)
4. J1939/J1708 9PIN Cable (from device to your truck)
5. 6PIN Cable (for old truck)
6. 14PIN Cable(for new truck)
7. Plastic box
Second Hand DELL Latitude 5414 Laptop Specification:
Model No: DELL-5414
Processor Type: Intel(R) Core(TM)I5 CPU i5-6300U
Memory Size: 8G
Condition: Used
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB
drive, the software can automatic realize it for ET3 Adapter, and the
machine can automatic weld the high quality Circuit board, quality will
be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III
need use USB Drive to install, and need choose the COM Port, and in the
software ET also need choose ET2 then can be used.
The Details as follows:
What's New - 2024A
Automatic Product Status Report (PSR) Upload
The service tool includes a new tool that automatically uploads Product
Status Reports. The tool scans for newly generated Product Status
Reports and uploads them when an internet connection is available. The
default is that automatic report uploading is enabled. The
Preferences dialog has an option to disable the tool.
What’s New – 2024A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the
same time. The service tool shows a message popup when the ECM is only
detected on one link. The service tool has been changed to add the
text **INCOMPLETE** in the ECM name when the connection is incomplete.
Service tool features that display a connection icon also use a new
icon for an incomplete connection.
What’s New – 2024A
No significant new features or feature enhancements
What’s New – 2024A
CEOS Fleet Configuration File TOP
A CEOS (Customer Electronic Option Selection) Fleet Configuration File
can be created/modified for an engine using the Service Tool. This is
available in connected and disconnected mode.
Error When Launching Service Tool
There is a Microsoft issue with upgrading libraries during an
installation involving certain versions of the C++ redistributable.
After a successful service tool installation, when trying to run the
service tool for the first time, one of the following errors may
occasionally appear: “The entry point could not be located in
api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll
is missing from your computer.” If either of these messages is
displayed, please let us know and we will send you to step by step
troubleshooting guide. This procedure requires administrator rights.
Service Tool License Corruption Issues with Windows 10 Updates
Windows 10 updates 1709 and 1803 will corrupt service tool licenses. Future Window 10 updates may do the same
If either of license error messages is displayed, please let us know
and we will send you to step by step troubleshooting guide.
What’s New – 2024A
Trainer Update – 988K XE Wheel Loader
The 988K XE Wheel Loader has been added to the Trainer application.
What’s New – 2024A
Preferences Option to Save a Product Status Report to PDF
The Preferences dialog for the Product Status Report has changed.
The dialog contains a new checkbox to automatically save a Product
Status Report as a PDF file when the report is created. The service
tool will continue to automatically save Product Status Reports as an
XML file.
What’s New – 2024A
Product Status Report Updates
The Product Status Report has been updated to include certain history
features supported by the ECM, such as the after-treatment Regeneration
History and the Service Test History.
Winflash Screen Update
The
screen for the Winflash feature has been updated. A new Expand All
button opens all sections of the screen to show all details for ECMs
detected by WinFlash.
A new Collapse All button hides all sections of
the screen, except for header rows showing detected ECM names.
