LAUNCH X431 PRO3 S+ V5.0 Auto Diagnostic Tool With DBSCAR VII Bluetooth VCI Supports CANFD and DoIP
Global version. No IP limitation.
LAUNCH X431 PRO3S+ V5.0 inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result. Through the simple wireless communication between the tablet and vehicle, it achieves full car model and full system vehicle trouble diagnosis, which include reading DTCs, clearing DTCs, reading data stream, actuation test and special functions.
Multi-language Supported (24): English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Simplified Chinese, Traditional Chinese.
Warm Tip: The factory presets the language and the model software in English. Please contact us to change the language.
1.With DBScar VII supports CAN FD and DoIP protocol
2.Supports full system diagnostic, ECU coding, VAG guided function and 37 special functions
3.Supports Topology Mapping diagnosis
upgraded Bluetooth connector: 3S+ scanner Bluetooth connector adopts advanced Qualcomm Snapdragon chip, which further improves the stability and reliability of the connection, reduces the interference and packet loss phenomenon in the transmission, and the transmission speed is 8X faster than before, and the working efficiency is improved by 65%.It has considerable advantages in terms of speed, stability, power consumption, positioning, etc, providing users with a better experience and a wider range of application scenarios. Bluetooth connectors are more stable and efficient than the X431 V4.0.
Launch X431 Pro3S+ 5.0 Functions:
1)ECU Coding
ECU Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of driveability, fuel efficiency, power loss, fault codes, durability of mechanical parts
ECU Coding(SCN Coding): The ECU coding function is used to reflash the vehicle control module, which allows you to reprogram the adaptive data of certain components after a repair or replacement has been performed, providing a method section for driveability, fuel efficiency, power loss, fault codes, and mechanical durability issues.
ECU REPLACEMENT: When an ECU/module is damaged, you have to replace it with a new one. After replacing the ECU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car cannot start or some parts cannot work normally. Featuring ECU/Module replacement functions, LAUNCH X431 pro 3 can help you initialize, match,relearn, or code the newly replaced ECU/module to get it back on track.
(PMI) Programmable Module Installation: LAUNCH X431 PRO3S apex Support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module. No need using the J2534 or buying a subscription.
Brush Hidden Functions: You will use this function when replacing modules such as audio, radar, windows, etc. It can refresh the car to achieve the effect of recognition module. Different cars support different module functions.
2)Actuation Test (BI-Directional Control )
LAUNCH X431 PRO3S+ V5.0 car scanner diagnostic tool features full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior & exterior lights, sound horn, test door lock actuators and such.
3) OE-LEVEL Advanced Functions:
Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
AutoAuth for FCA/ SGW,:Use the latest software update function AutoAuth to provide OBDII diagnosis, active testing, calibration, etc. for modern FCA/SGW vehicles, making the diagnostics more secure. Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later (NOTE: FCA Americas can be registered and used for free)
Cylinder Balance Test/Cylinder leakage test/Cylinder Pressure variations.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Parameterization: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Anti-theft IMMO Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.
Programmable Module Installation: Compatible with Ford / Mazda etc.
Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.
Key Programming : Add, Delete & Reprogram Keys, Rewrite smart keys, Replace smart key ECU, Replace KNOB IGNITION; Reset Key: Relearn a key.
4)41+ Professional Special Functions
LAUNCH X431 PRO3S+ V5.0 provides many powerful special functions for precise test of the vehicle’s health status.
Note: You can find 21 kinds of commonly used reset functions in the reset menu, and other special functions in the car brand diagnostic software menu.
1. OIL RESET–Reset the oil life systems every time the oil and oil filter are changed;
2. FUEL INJECTOR CODING–Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
3. BRAKE RESET–Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
4. SAS RESET–Perform steering angle sensor calibration and clear records;
5.BAT RESET–Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
6. ABS BLEEDING–When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
7.ELEC. THROTTLE RLRN–Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
8. TPMS RESET–Tire pressure resetting is required to be performed after maintenance is performed;
9. Key CODING: Help ECU to recognize the new keys when you need to add new keys.
10. DPF REG–Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
11. GEAR(Crank Position Sensor Adaptive) LEARN–Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced. (Available in the system menu and free. Depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.
12. EPB RESET–Help replace and reset the brake pad.
13. AFS HEADLAMP RESET–Initialize the adaptive headlamp system.
14. SUNROOF INITIALIZATION–The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
15. SUSPENSION RESET–Adjust the vehicle body height sensor for level calibration.
16. GEARBOX RESET–Help complete the gearbox self-learning to improve gear shifting quality.
17. TIRE RESET–Set the size parameters of the modified or replaced tire.
18. A/F RESET–Set or learn Air/Fuel ratio parameters.
19. ADBLUE RESET(Diesel Engine Exhaust Gas Filter)–Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
20. COOLANT BLEEDING - Activate the electronic water pump.
21. NOX SENSOR RESET - Reset catalytic converter learned value stored in ECU.
22. STOP/START RESET - Set up the automatic start-stop function in ECU.
23. SEAT CALIBRATION - Calibrate the memory in replaced or repaired seats.
24. TRANSPORT MODE - Deactivate the transport mode.
25. WINDOWS CALIBRATION - Perform door window matching to recover ECU initial memory.
26. AC SYSTEM RELEARN/INITIALIZATION.
27. EGR RESET.
28. RESET FUEL ALCOHOL LEVEL.
29. RESET FUEL TRIM.
30. HIGH VOLTAGE BATTERY DIAGNOSTICS.
31. GPF REGENERATION.
32. LANGUAGE CHANGE - Change vehicle system language, etc.
New Special Features Added for the 30th Anniversary LAUNCH： 1. GPF Regeneration,2. High Voltage Battery Health Test,3. Transport Mode, 4. Intelligent Cruise control 5. Engine Power Balance Monitoring ,6. Stop Start (Available after selecting a system,always keep growing)
(Available in the system menu and free. Depending on the specific car models, NOT for all cars. ) More and more function will be improved and optimized.
2024 New Added Functions: Topology Map, improving your working efficiency highest than ever.
Compared with other high-end scanners in the market, the X431 Pro3S+ scanner with topology map function diagnose all the systems of the car in seconds, and all the healthy and unhealthy data in the car's system will be displayed, pinpointing the car's faults,greatly improve work efficiency and save time. Like other scanners, such as the X431 V Pro 4.0., X431 Pro Ellite, X***D9, etc. they needs to detect and diagnose one system by one, which can't locate the automobile faults comprehensively and accurately, and reduces the working efficiency greatly. Because LAUNCH X431 Pro3S + for repair stores, engineers, Diyer is an great investment!
Supported Vehicles List：
- European Cars:
For Audi, For Mercedes-Benz, For Maybach, For BMW, For Mini, For HCBMW, For Rollsroyce, For Citroen, For Fukang, For Ferrari, For Fiat, For Abbas, For Lancia, For Romeo, For NanjingFiat, For GAZ, For LandRover, For Jaguar, For Martha Lahti, For Open, For GMSA, For Vauxhall, For Peugeot, For DFPeugeot, For Porsche, For Renault, For Dacia, For Rover, For SAAB, For Skoda, For Seat, For Smart, For Transporter&V-Class, For VAZ, For Volvo, For VW, For Bingley, For Bugatti
- American Cars:
For Brazil Fiat, For Brazil GM, For Chrysler, For Dodge, For Jeep, For GM, For Buick, For Cadillac, For Chevrolet, For Ford, For ChinaFord, For Lincoln, For EuropeanFord
- Asian Cars:
For Daewoo, For Daihatsu, For Honda, For Acura, For DFHonda, For GZhonda, For Hyundai, For Ikco, For India Mahindra, For India Maruti, For India Tata, For JPIsuzu, For TLIsuzu, For Kia, For Luxgen, For Mahindra, For Malaysia Asia Pacific Perodua, For Malaysia Asia Pacific Proton, For Maruti, For Mazda, For YQMazda, For Mitsubishi, For Nissan, For Infiniti, For DFNissan, For Perodua, For Proton, For SAIPA, For Ssangyong, For Subaru, For Suzuki, For TATA, For Toyota, For Lexus, For TJToyota
- Australian Cars:
For Australia Ford, For Australia Horton
- Chinese Cars:
For Chang'an, For ChangCheng, For Chenghe, For DR automotive, For ECUADI, For BYD, For Foton, For Hafei, For Haima, For Brilliance, For Jiangling, For Iveco, For Jac JAC refine general, For Gonow Auto, For Xiamen Golden, For Kowloon, For Lifan auto, For GSMW, For SAIC Chase, For MVW Automotive, For Chery, For SAIC and MG, For SGM, For CHCHEVROLET, For CHBuick, For CHCadillac, For Tianjin FAW, For XinKai, For ZhongShun, For ZOTYE, For Zhongxing
(Note: Some car brands can only be used after the payment, please contact us before purchase.)
Launch X431 Pro3 S+ V5.0 Specifications:
Display Tablet
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Screen: 10.1 inch capacitive touch screen with a resolution of 1280 x 800 pixels
Camera: Rear-facing 8.0MP camera
Communication: Bluetooth/USB
Working temperature: 0℃ ~ 50℃
Storage temperature -20℃ ~ 70℃
Package Includes:
1pc x X431 Pro3S+ Display tablet
1pc x VCI connector
1pc x HDB15F to HD15F data cable
1pc x HD15M to OBD II 16 adaptor
1pc x Password envelope
1pc x Power adaptor kit (1 + 2 switching adaptors)
1pc x Type-A to Type-C USB cable
1pc x Multilingual quick start guide
1pc x User manual
1pc x Non-16 pin adaptor kit
Launch X431 Pro3S+ Add-on Modules
1. X431 VSP-600 Videoscope (For inspection of hidden and narrow parts of the engine, fuel tank, brake system, etc.)
2. X431 TSGUN/i-TPMS (You can use it not only to activate the sensor ID, tire pressure, sensor frequency, tire temperature and battery status; you can also program sensor data to a blank LAUNCH branded sensor in three ways: automatically, manually and by activating a copy; at the same time, you can write the newly programmed sensor ID to the vehicle ECU.)
3. X431 X-PROG 3 (IMMO For V.A.G Group Above 3.5,advanced immobilizer and key programmer) Vehicles that require a clone key are not compatible with this accessory.
4. X431 Heavy Duty Module -LAUNCH HDIII or SmartLink C 2.0 add-on module is an essential truck module which can turn your X431 scan tools into full function heavy duty truck diagnostic tools,working on both heavy-duty(Class 4 through 8) and medium-duty trucks(Such as heavy trucks, city buses, bulldozers, excavators, etc.)
5. X431 ADAS Mobile/ADAS PRO -Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
6. X431 Printer (Print out diagnostic data/ reports.)
7. X431 BST360 battery test. (For Battery Cranking system Test, Battery Charging system Test, Battery Health Test)
8. EV diagnostic kit: perform battery pack analysis
9. IMMO Software Package: advanced immo key programming with x-prog3
10. O2-2 Oscilloscope: (4 Channels) Analizador Digital Scopebox Tester
11. S2-2 Sensorbox: 2 Channels Handheld Sensor Simulator and Tester
12. Launch X431 Key Programmer: generate remote etc
X431 Pro3s+ V5.0 vs X431 Pro3S+ V2.0
V5.0 comes with DBscar VII supports CAN FD and DoIP protocol.
V2.0 with DBscar VI, does not support CAN FD protocol.
Launch X431 Pro3s+ V5.0 vs X431 V V 4.0
1. Advanced Hardware:
(1) A multi-touch, Android 10.0 tablet-style capacitor screen for quicker, more smooth and comfortable experience.
(2) Advanced 8.0 core Qualcomm Snapdragon processor to be 8X faster than X431 V pro 4.0 ,smart and more stable with larger 4GB RAM and 64GB ROM (128GB extendable) to boost quickly ,speed up your diagnosis work and store more vehicles repair datas for you.
(3) Upgrade dual-band 2.4GHz & 5GHz wireless connection, the transmission rate is 12X faster than X431 V 4.0. The built-in bluetooth module provides easy connection to vehicles in any location to work comfortably, leaving bad weather outside, and allows to scan scanning of vehicle that will not fit in a bay or lift.
(4) 10.1-Inch LCD Touchscreen with 1920 x 1200 High-Resolution:Brings a clear and vivid viewing.
(5) 6300mAh Rechargeable Battery:Long-lasting,makes it running faster, avoid frequent charging.
(6) you can install any Software application,like Tiktok,Facebook, instagram on the scanner, etc.
(7) Bluetooth connector has the BDScar VI upgraded to the DBScar VII, so you'll receive a brand new upgraded connector
