Yanhua Mini ACDP Programming Master WIFI For BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+FEM BDC IMMO Key Programmer and Odometer
The Yanhua Mini ACDP hardware itself supports CPU read and write function only.You can pay for different modules, e.g FEM/BDC module, CAS module, read DME ISN module and a couple of other modules.
6 Different Authorization. When you order, please choose authorization you need freely !
1.Only hardware
2. Hardware + BMW CAS-CAS3+ Key Programming by OBD :
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost
BMW CAS4/CAS4+
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding
3.FEM/BDC (Buy Module 2 USD645):
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding
4. Read and Write ISN Code (Buy Module 3 USD468):
N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX….
5. BMW 35080, 35160DO WT Read & Write (Buy Module 4 USD355)
Read and write BMW M35080, 35160DO WT etc EEPROM
6.For Fujitsu CPU MB91F Read & Write Module (Buy Module 5 USD338)
Supports for Honda FIT/ Vezel/ Fifth generation for Hyundai Sonata/ Kia K3/K5 etc for Fujitsu CPU MB91F series read & write function.
7. Yanhua Mini ACDP Key Programming Master Full Package
Yanhua Mini ACDP Highlights:
Test car NO longer needs engines
YANHUA car keys programming NO longer need soldering iron
Car locksmith NO longer needs soldering work.
The first in the world
Programming no need soldering
Yanhua Mini ACDP Functions
1. Memory programming:
Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).
2. For BMW module programming:
(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.
(2) For BMW engine ECU data reading and ISN code reading
3. For V-W module programming. MMC instrument
4. Instrument mileage and airbag ECU reset/maintenance is under development.
5. For BENZ for BMW for Audi and various models are upgraded successfully
Yanhua Mini ACDP IMMO/Mileage Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
For BMW: CAS4/FEM/BDC/16ODOWT
Solder-free programming Data safety
WIFI Free connection
1. Overturn the traditional work mode, single operation is changed to team cooperation
2. Change of operation mode, PC operation is changed to mobile phone operation
3. Change of test connection mode, electric soldering iron is changed to no-solder dedicated connector
4. Change from artificial observation to intelligent monitoring Artificial observation / trying is changed to automatic detection algorithm, grap hical in dication the relability of connection.
Ensure the data is not damayed and lost
5. Change of service mode: Offline service is changed to online synchronous service
ICP: Memory and MCU programming In Circuits
MCU programming in Circuits
A game changer for BMW Key Programming
1. CAS4/CAS4+ Key Programming Without Soldering or removing component.
2. FEM/BD.C Key Programming without Soldering/Welding
3. Read ISN Code from OBD Port directly(Partially)
Package List:
1pc x ACDP Programmer Master
1pc x OBP+ICP adapter
1pc x Puncture socket
1pc x P8P ribbon cable
1pc x 8P cable
1pc x 20P cable
1pc x P CAN cable set
1pc x 12V power adapter
3pcs x paint surface cleaning needles (1.0mm,0.8mm,0.5mm)
