SVCI 2020(FVDI) commander unlock version with full 22 software, multifunctional tool supports vehicles till 2020. Covers diagnosis, clearing of fault codes, reading of data streams, and motion testing etc. and SVCI 2020 VW Audi special function just released.
SVCI 2020 Diagnostic Tool Highlights:
* Does not require activation; Won’t be locked.
* Adds Suzuki, JLR and Daihatsu software (other FVDI does not support)
* Support all 22 software till year 2019
* Adds 19 software than FVDI 2018
* Language: English, French
* NXP Smart Chip, Fast Speed.
* Operating System: Win7 and Win10.
SVCI 2020 VW Audi Special Function Update
Support MQB platform and Component Protect
New in V7.4:
– Automatical recognition of swapped files in dump tool. In the most cases the no need to flip bytes manually
– Added support for unsupported till now subtype of Simos7.1 engine control units – Login (PIN) and component security are now available
New in V7.7:
– Added support for VDO instruments cluster 2006+ – odometer changing, reading PIN codes, read/write immobilizer data. Initially only first VDO versions are supported.
– Key-learning – adding key for 15 seconds (old keys continue to work) for VDO CAN instruments
New in V7.9:
– When reading ME7 the MAC is also displayed. Possible to change MAC for ME7 in dumptool too.
– Preapre dealer keys for Q7/A6/Allroad directly from the EZS-Kessy dump
– Learn keys for Q7/A6/Allroad directly in the EZS-Kessy dump
New in V17.0
1. Component protection generation 1:
– Audi A8 2003-2010 (Instrument cluster, seat memory driver, seat memory passenger),
– Audi A6 2004-2008 (MMI, ILM Beifahrer, Central electric, MP3 CD-Changer)
For the A8 seat memory (driver and passenger) also the vehicle identification number is synchronized authomatically.
2. EZS-Kessy adaptation for Audi A8 (2003-2008) and VW Touareg (2007-2008)
3. VDO instrument SW version VK354608LL – V09.00.00 added – no need of working key!
4. VDO instrument SW version V354608ML – V08.00.00 added – no need of working key!
5. VDO instrument SW version VK354607LL – V09.00.00 added – no need of working key!
6. VDO instrument SW version VK354608LL – V08.00.00 added – no need of working key!
7. Johnson Controls Instrument Cluster – mileage recalibration , EEPROM Read/Write.
8. Common user interfaces for all CAN instrument clusters. Now the instrument cluster type is autodected
and all CAN dashboards are read/write in one common place (mileage, immobilizer data, keys)
9. VW Touareg and Audi A6/A7/A8 2010+ added to AN038 and AN039 if there is a working key (or a dealer key)
10. Johnson Controls Instrument Cluster – key-learning completely by OBDII, no need of working key.
New in V23.0
1. Component protection generation 1 for Audi A8 DSP Bose 2003-2010
2. Component protection generation 2 for Siemens Airbags (UDS) (need to modify EEPROM dump)
3. Component protection generation 2 – improved functionalitiy and added SW versions for Climate Control for A6/Q7/Allroad (C6) 2005-2010
4. A6/Q7/Allroad (C6) 2005-2010 simplified transmission adaptation procedure with just one click.
5. EDC17 Boot-Mode – added possibility to change the PIN/CS/MAC/ImmoNumber/Vin directly in the dump
6. Replace of defective BCM2 improvement. Now all BCM2 are covered and no more problem with component protection int MMI2G and MP3 CD-Changer after exchange.
7. TC1767 and TC1797 write flash by boot-mode added
8. Added new versions of VDO NEC dashboards ?both mileage and keylearning
9. Component protection generation 1 for Audi A8 Bosch Airbag 2003-2010
10. DPF OFF for EDC16/EDC17
New in V38.1
– Added modules for diagnostic for the latest MLB platform (A6/A7/A8 2017+, Q7 2015+)
For the full list, please check in Tech Support.