VAG Diagnostic Tool V16.8 New Features:
-Support for MLB2 platform cars (HEX-NET interface recommended)
-Support for 2016 and early 2017 model cars
-Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
-Improvements in Advanced Measuring Value Selection Window
-Display of factory identifiers instead of arbitrary location numbers
-Support for Six-Digit security access codes
-HEX-NET Turbo and other speed optimizations
-Optimized low-level timing routines and CPU core affinity
-Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
-Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
-Fixes SRI reset in newer Crafter instruments.
-New ASAM data and Label Files
-Many other small fixes and improvements introduced in Beta versions 16.3-16.7
VAG Diagnostic Tool V16.8 New Add:
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
008 (Service 22) From the station control module 007 coding (service 1A)
008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module
VAG Diagnostic Tool V16.8 FAQ:
Q: Does VCDS 16.800 support pc internect connection?
A: yes,but not suggest.
Q: VAG VCDS 16.800 support run RT software directly?
A: no,run modified software from us,working perfectly same to RT software.
Q: VAG VCDS 16.800 support longcoding full functions?
A: yes.full functions.
Q: Do the VCDS 16.800 need change pc time?
A: no need.
Q: What’s the VCDS 16.800 main chips ?
A: Original Full-chip: ATMEGA162 + 16V8B + FT232RL , add self recovery chip: STC12C2052
Q: VAG VCDS 16.800 support all systems ?
A: yes, including K1,K2,CAN,UDS
if you want to view more details, please click:
VAG Diagnostic Tool VAG-COM For VAG VW Audi Seat Skoda V16.8