Original tango key programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. Autonumen.com share the way to use Tango programmer to copy a key transponder?
Firstly, run the Tango key programmer software and select vehicle and read information in the “Info” window. Watch the data location field to locate the memory chip. Locate the chip inside of the immobilizer and read it. Save the read data (dump).
Click the “OPEN IMMOBILIZER FILE” button to download the saved dump.
Tango key programmera
Then the Tango programmer will start analyzing the dump.
When the programmer confirm the dump is correct, the “WRITE” button will be activated and the “Keys” window will display the range of key numbers that can be created.
Check the “Info” window, especially the Allowed transponder field to make sure the transponder you use is of the right type.
Tango key programmerb
Place the transponder into the coil on Tango key programmer.
Choose the key cuts you want create in the “Keys” window.
Click the “WRITE” button.
The writing process will start and transponder will be stored with the appropriate data.
Save a new immobilizer dump when the Tango key programmer software asks you to.
Save a standard File Save dialog when it is displayed on the program.
The new data is saved and must be written into the immobilizer
Tango key programmerc
Write the new dump into the immobilizer. The immobilizer is ready to operate with the created a new transponder .
Finish.
Anyway,this obd2 scaner is Simple operation,you can try it!