1. How to Program Your Honda Remote in 9 Easy Steps
If you’ve recently bought a keyless remote entry fob for your Honda or the battery died in your existing remote, programming it is quick and easy. There’s no need to take the remote to a dealership for programming, simply follow these 9 simple steps.
A Step by Step Guide for Programming Your Honda Remotes
Step 1: Gather all the remotes. You only need one remote to access program mode, but all remotes must be programmed during the same session. Your Honda will “forget” any remote previously Auto key Programmer.
Step 2: Sit in the vehicle with all the doors closed and unlocked.
Step 3: Turn the key to the ON position, one click before starting the ignition. The lights on the accessories should come on and the dash will light up.
Step 4: Within 5 second of turning the key to the ON position, press the LOCK button on your remote control transmitter for one second.
Step 5: Turn the key to the OFF position.
Step 6: Repeat Steps 4 & 5 two more times for a total of three ON/OFF cycles. Each step must be done within 5 seconds of the previous step.
Step 7: Turn the key back to the ON position (this will be your fourth turn of the key), press the “LOCK” button on your remote. The locks on your Honda will make a clunk noise exactly as they do when locking. You doors have not locked. This noise indicates your Honda is now in Remote Programming Mode. Do not turn the key off.
Step 8: If you would like to program more than one remote, press the LOCK button on each additional remote for 1 second. As with all other steps, you have 5 seconds to complete this step. Programming Mode will be activate for a total of 10 seconds. Only 3 remotes can be programmed to each Honda.
Your locks will make the clunking noise (as though the doors have locked) after each remote is programmed to indicate they have been successfully stored in the system’s memory.
Step 9: Turn the key to the OFF position and remove it from the ignition. Test all of your remotes to ensure they have been successfully programmed.
Remember that your remote will not work if the key is in the ignition. If you’ve lost your keyless entry remote, it’s a good idea to reprogram your Honda remote to protect your vehicle from theft.
2. Lonsdor K518ISE Program 2016 Honda CR-V Smart Key
2016 Honda CR-V add Smart key with Lonsdor K518ISE key programmer.
very easy…
Using the aftermarket key from my local area
Picture attached
3. How To Use The Honda Accord Smart Key with Push Button Start
How to use the Honda Accord Smart Key. Honda’s Accord Smart Key has many unique functions that you need to know if you own one. These tips and tricks will add so much more convenience to your life. HondaPro Jason does an amazing job walking through what each function is and how to use them in the video below. Below is a list explaining everything in detail.
How To Use The Honda Accord Smart Key with Push Button Start
Lock & Unlock the Vehicle:
There are many ways to unlock & lock the car from the outside.
* 1st way is to hit the unlock button and lock button on the Smart Key Fob
* 2nd way is to put the key in your pocket or purse. Put you hand in the door handle, when the car beeps the vehicle is unlocked and you could open the door. To lock the door just press the black button on the door handle and all four doors will lock.
Roll Windows Down From Outside:
* Click the unlock button and you will see the lights flash. Immediately after that press and hold the unlock button again and the windows and sunroof will open.
What If the Battery Goes Dead in the Smart Key Fob:
If the battery goes dead in the key fob there is no need to panic. You will still able to unlock, lock and start the vehicle.
* Slide the tab over on the back side of the key fob and you will be able to slide the traditional key out of the key fob. From there you can lock and unlock the car with the key as you would with a traditional key.
?The windows can also be rolled up with the key by locking the car and holding the key in the lock position until the windows are shut and the moonroof is closed.
* To start the vehicle with a dead Key Fob put you foot on the brake and simultaneously hold the key fob right next t0 the start/stop button while pressing it twice.
Opening Trunk
* Hit the trunk button on the key fob
* Or press the button on the back of the trunk lid.
If you accidentally leave the key in the trunk in a gym bag or jacket there is no need to worry because the trunk will not lock.
Memory Seat Presets
You will notice a number 1 or a number 2 on the back of each key. This is for the memory seats. Once you set the memory seats using the 1 & 2 buttons on the inside of the door the seats will automatically adjust to where you like them every time you get in the car with your key.
Starting & Shutting Car Off
* Turn on the car: Put your foot on the break and press the start/stop button
* Turn off the car: Simply press the start/stop and the car will shut off.
* Turn accessory mode on: Without your foot on the break press and release the start/stop button twice.
Valet Key
Use the quick release tab to take the traditional key out. Hand the key fob to the valet driver and keep the traditional key. In the glove box hit the off button on the trunk symbol and this will cut the power to the trunk. Then lock the trunk release lever on the drivers side floor with traditional key.