How to get Vediamo to work with VAS5054A

Tips and guide: Vediamo working with vas5045a head – how to set up

try vediamo 4.02.02. it has setting for passthru.
try vas5054a x64bit driver. there are two threads regarding vas5054a in forum from two members.
edit slave.ini in c:\program files (x86)\vediamo\caesar\. Change devicename to:

; ——————-; PartJ configuration; ——————-

DeviceName=”Softing – VAS5054A#082145725″

change “serial number” with your vas5054A serial number

try ‘CAN’ ecu. VAS driver is not fixed yet for k-line ecu.
good luck and enjoy the experimental and educational journey.

Good to know: vas 5054a also can work with xentry

211/203/204:

I Have USED Clone VAS5054 w/OKI on 211/203/204 Body styles can be viewed, things can be activated, error codes was able to clear, adaptation was able to be completed, VIN was read, cars was identified

C203 2003:

I am testing Xentry Passthru 12.2017 with VAS5054 on C203 2003. everything works without problem.  on line k too.

2006 CLS55 AMG, 2007 R Class, 2008 Sprinter:

I used my VAS5054a with the 2006 Mercedes CLS55 AMG, 2007 R Class, 2008 Sprinter, all in DAS.  Everything worked except the ignition detection.

C 250 2014

I used VAS5054a with C 250 2014 using Xentry, everything works fine, no sense of ignition, but Xentry gives you a check box to manually select.

2006 for Mercedes:
I have not tried more than 2006 for Mercedes, but I’m sure the limit is in software / drivers.