FVDI AVDI ABRITES Commander active AMG Logo for Mercedes Benz

Here I’m show you that how to use FVDI AVDI ABRITES Commander active AMG Logo for Mercedes Benz.

Important:

-Save complete variant coding of KI/IC/DASH->maybe necessary

-Save always original Eeprom –>if new Eeprom does not fit you may write the original one back Possibilities:

-Switch a non AMG cluster into a AMG cluster but you need a new km plate then

-Switch the digital KI/IC/DASH without any hardware changes

1.Start Mercedes V7.0

2.Open special functions

Choose read/update Confdata

3.Choose the write Dash/KI/IC
Read will download the original Dash/KI/IC Eeprom -PERFORM THIS ALWAYS Save to file will save the read Eeprom data

4.Choose the Bin file you want to write into Dash/KI/IC

5.Pressing update will upload the data into Dash/KI/IC

6.Message that the upload is completed should appear

7.Turn off ignition

8. Close door

9.Close car

10.Open car

11.DASH/KI/IC should show AMG start up logo

12.Three dashes should appear for km—

13.Error should appear that DASH/KI/IC is not adapted/taught in.