Autel MaxiSys MS908P Wireless printing can be difficult to get your head around as it requires your MaxiSys to communicate with your PC through a network. This sounds a lot more complicated than it really is.
Difficulty: Average. Knowledge of installing a traditional printer will be a bonus.
Time: 10 – 20 mins based on internet connection and updates.
What to prepare:
1.An active Internet connection on your PC.
2.A Wireless Network – such as a broadband router.
3.A Windows Based PC with full administrative Rights (be able to run programs in administrative mode)
4.To make sure the PC is connected to the network either wirelessly via Ethernet.
5.Your PC to have Adobe Reader installed.
6.The MaxiSys PC Suite CD (located in the box).
Once you have done this, follow the steps below to install the Print Driver on your PC.
1.Place the MaxiSys PC Suite CD into your CD Drive. The software may load automatically, but if not, Click Start and then My Computer.
2.You should now see a Orange Folder listed where your CD drive usually is; this is the Autel software CD. Double click to open this up. Inside this folder you should see an icon calledAutorun.exe. Click This. The welcome screen of the PC suite should now boot
3.On the PC Suite screen, select which Bluetooth Interface you have (at time of going to publish, almost all UK users will have the black Bluetooth VCI unit, displayed on the right) by clicking The installation will now begin.
4.During installation you may be prompted to Install Drivers or if you have a firewall, to allow the software certain security preferences. This is because the software is communicating with your network. You must accept these preferences or the software will be blocked and printing will not work.
5.Once installation has finished, you will need to open the MaxiSys Printer. To do this click Startthen All Programs. Now scroll through your applications until you find MaxiSys PC Suite. Within this folder you will find MaxiSys Printer. Click on this Item.
6.The Printer Driver will open and you will see a printer icon in the bottom right of your PC, next to the Time and Date. The Printer Driver is now installed.
7.You may be prompted to perform an update (such as in the demonstration video above), if so its a good idea to keep the software up to date. Remember to always allow firewall preferences or new Autel drivers to be installed.